GOST ISO/IEC 17000-2012

ГОСТ ISO/IEC 17000-2012

Conformity assessment. Vocabulary and general principles

Оценка соответствия. Словарь и общие принципы

Status: Effective - Introduced for the first time. IUS 7-2013

This standard establishes general terms and definitions related to conformity assessment, including accreditation of conformity assessment bodies, as well as the use of conformity assessment to facilitate trade. This standard is not intended to provide a dictionary of all concepts that can be used to describe specific types of conformity assessment activities. The terms and definitions are given in it only if the concept being defined cannot be interpreted on the basis of the commonly used use of the term or if the existing standardized definition is unacceptable.

Настоящий стандарт устанавливает общие термины и определения, относящиеся к оценке соответствия, включая аккредитацию органов по оценке соответствия, а также к использованию оценки соответствия в целях содействия торговле. Настоящий стандарт не предназначен для того, чтобы дать словарь всех понятий, которые могут быть использованы при описании конкретных видов деятельности по оценке соответствия. Термины и определения приведены в нем только в том случае, если определяемое понятие не может быть истолковано исходя из общеупотребительного применения термина или если существующее стандартизованное определение неприемлемо

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 25

Approved: Federal Agency for Technical Regulation and Metrology, 12/25/2012

SKU: RUSS68683

Price: $322.04




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 03 Sociology. Services. Organization of firms and their management. Administration. Transport »

PromExpert » SECTION I. TECHNICAL REGULATION » IV Conformity assessment of products and services » 1 Key points infield of conformity assessment »

ISO classifier » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.040 Dictionaries » 01.040.03 Services. Organization of companies, their management and quality. Administration. Transport. Sociology (Dictionaries) »

National standards » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.040 Dictionaries » 01.040.03 Services. Organization of companies, their management and quality. Administration. Transport. Sociology (Dictionaries) »

ISO classifier » 03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT » 03.120 Quality » 03.120.10 Quality Management and Quality Assurance »

National standards » 03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT » 03.120 Quality » 03.120.10 Quality Management and Quality Assurance »

ISO classifier » 03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT » 03.120 Quality » 03.120.20 Certification of products and companies. Conformity assessment »

National standards » 03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT » 03.120 Quality » 03.120.20 Certification of products and companies. Conformity assessment »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T59 General methods and means of control and testing of products. Methods of statistical control of quality, reliability, durability »


The Document is Referenced By:

GOST 12.0.230.2-2015: Occupational safety standards system. Occupational safety and health management systems. Assessment of conformance. Requirements

GOST 33981-2016: Assessment of conformance. Studying design of products

GOST 34378-2018: Translucent enclosing structures. Windows and doors. Installation work execution, check and demands for results of works

GOST ISO/IEC 17011-2018: Conformity assessment. Requirements for accreditation bodies accrediting conformity assessment bodies

GOST ISO/IEC 17040-2012: Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies

GOST ISO/IEC 17067-2015: Conformity assessment. Fundamentals of product certification and guidelines for product certification schemes

GOST R 50.03.02-2017: Conformity assessment system for the use of nuclear energy. Experts on conformity assessment in the form of review of the technical documentation. Requirements and procedure of confirmation of competence

GOST R 50.04.06-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for new material (base or welding)

GOST R 54418.22-2014: Renewable power engineering. Wind power engineering. Wind turbine. Part 22. Conformity testing and certification

GOST R 56040-2014: Conformity assessment. The requirements for training programs of certification experts of products, services, processes

GOST R 56041-2014: Conformity assessment. The requirements for training programs of certification experts of products, services, processes

GOST R 56399-2015: Conformity assessment. Guidelines for determining the duration of management system certification audits

GOST R 56570-2015: Quality management systems for enterprises of aviation, aerospace and defence industries. Audit requirements

GOST R 56606-2015: Control technical condition and functioning of medical devices. The main provisions

GOST R 56836-2016: Conformity assessment. Rules for cements certification

GOST R 56846-2015: Health informatics. Interoperability of telelearning systems

GOST R 56892-2016: Requirements for medical device auditing organizations for regulatory authority recognition

GOST R 57093-2016: Requirements for testing laboratories (centers) of railway products

GOST R 57194.3-2016: Technology transfer. Technological audit

GOST R 57301-2016: Health informatics. Security and privacy requirements of EHR systems for use in conformity assessment

GOST R 57451-2017: Medical devices. Quality Management System. Requirements for competence and maintaining competence for audit organizations that audit medical device manufacturers for regulatory purposes

GOST R 57544-2017: Conformity assessment. Vocabulary related to competence of persons used for certification of persons

GOST R 57577-2017: Energy management systems. Requirements for bodies providing audit and certification of energy management systems

GOST R 58289-2018: Conformity assessment. Electricity Certification Rules

GOST R 8.824-2013: State system for ensuring the uniformity of measurements. General requirements for the competence of reference material producers

GOST R ISO 15189-2015: Medical laboratories. Particular requirements for quality and competence

PNST 186-2017: Construction of objects using atomic energy. Requirements to personnel making works that affect the safety of nuclear energy sites

PNST 298-2018: Conformity assessment. Recommendations for quality manual content of testing laboratory

PNST 299-2018: Conformity assessment. Recommendations for quality manual content of inspection body

PNST 300-2018: Conformity assessment. Recommendations for quality manual content of certification body

PNST 58-2015: Conformity assessment. Requirements for expert auditor. Expert auditor for assurance of conformity. General requirements

GOST ISO/IEC 17025-2019: General competency requirements for testing and calibration laboratories

GOST R 50.06.02-2017: Conformity assessment system for the use of nuclear energy. Specialists in conformity assessment in the form of acceptance. Requirements and procedure of confirmation of competence

GOST R 58337-2018: Quality management systems for organizations in the aviation, space and defense industries. Certification System Oversight Requirements

GOST R 58604-2019: Unified energy system and isolated energy systems. Thermal power plants. Automated process control systems. Terms of creation. Norms and Requirements

GOST R 58688-2019: Explosive atmospheres. Rules for assessing the competence of personnel involved in the installation, maintenance, repair and restoration of electrical installations for use in explosive atmospheres

GOST R 58692-2019: Explosive atmospheres. Rules for assessing the conformity of quality management systems of organizations carrying out installation and initial inspection of electrical installations for use in explosive atmospheres

GOST R 58693-2019: Explosive atmospheres. Rules for assessing the conformity of quality management systems of organizations carrying out inspection and maintenance of electrical installations for use in explosive atmospheres

GOST R 58695-2019: Explosive atmospheres. Rules for assessing the conformity of quality management systems of organizations engaged in the repair and restoration of electrical installations for use in explosive atmospheres

GOST R ISO/IEC 17024-2017: Conformity assessment. General requirements for bodies operating certification of persons

ITS 38-2017: Fuel combustion in large plants for energy production

Management system of the Federal Service for Accreditation 04.1-9.00: Policy on the use by accredited persons of the mark of the national accreditation system. Version 03. May 2021

Management system of the Federal Service for Accreditation 04.1-9.00: Policy on the use by accredited persons of the mark of the national accreditation system. Version 04. June 2021

SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Aviation fuels. Calculating net calorific value
Language: English
Price: $179.45
Aviation fuels. Calculating net calorific value
Language: English
Price: $192.06
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40

YOUR ORDERING MADE EASY!

UzbekistanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!