GOST R 56006-2014

ГОСТ Р 56006-2014

Pipeline valves. Testing and acceptance on objects of the gas main pipelines before commissioning. General technical requirements

Арматура трубопроводная. Испытания и приемка на объектах магистральных газопроводов перед вводом их в эксплуатацию. Общие технические требования

Status: Effective - Introduced for the first time. IUS 8-2015

This standard establishes the requirements for the organization, content and scope of work during the acceptance, testing and control of pipeline fittings at gas pipeline facilities before commissioning newly designed, constructed, repaired and reconstructed facilities, as well as facilities subject to technical re-equipment. This standard applies to valves that meet the requirements established by [1], GOST R (draft) and used at gas pipeline facilities defined by the scope of application [2] and (or) other regulatory documents that meet or facilitate compliance with the requirements of relevant federal laws and technical regulations. This standard applies to valves of imported and domestic production of nominal diameters up to DN 1400 inclusive of a nominal pressure PN of not more than 25 MPa of the following main types and types: - stop valves: ball and cone valves, valves, valves, butterfly valves; - control valves: ball valves, valves, including regulators; - safety fittings: valves; - check valves: valves and valves

Настоящий стандарт устанавливает требования к организации, содержанию и объему работ при приемке, испытаниях и контроле трубопроводной арматуры на объектах магистральных газопроводов перед вводом в эксплуатацию вновь проектируемых, строящихся, ремонтируемых и реконструируемых объектов, а также объектов, подлежащих техническому перевооружению. Настоящий стандарт распространяется на арматуру, соответствующую требованиям, установленным [1], ГОСТ Р (проект) и применяемую на объектах магистральных газопроводов, определяемых областью применения [2] и (или) иных нормативных документов, обеспечивающих выполнение или способствующих выполнению требований соответствующих федеральных законов и технических регламентов. Настоящий стандарт распространяется на арматуру импортного и отечественного производства номинальных диаметров до DN 1400 включительно на номинальное давление PN не более 25 МПа следующих основных видов и типов: - запорная арматура: шаровые и конусные краны, клапаны, задвижки, дисковые затворы; - регулирующая арматура: шаровые краны, клапаны, в том числе регуляторы; - предохранительная арматура: клапаны; - обратная арматура: затворы и клапаны

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 4/24/2014

SKU: RUSS74053

Price: $797.34




The Product is Contained in the Following Classifiers:

Standards for pipe fittings (TPA) » 14. Operation and repair of injection molding machines » 14.1 Installation »

Standards for pipe fittings (TPA) » 11. Piping valves (TPA) tests » 11.3 Additional test procedures »

Standards for pipe fittings (TPA) » 11. Piping valves (TPA) tests » 11.2 Basic test procedures »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.4 For pipeline transport of oil and gas »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.2 For gas industry »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipe fittings » 23.060.01 Pipe fittings in general »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipeline valves » 23.060.01 Pipe fittings in general »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.180 Equipment for oil and gas industry » 75.180.01 Equipment for oil and gas industry in general »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.180 Equipment for oil and gas industry » 75.180.01 Equipment for oil and gas industry in general »


The Document References:

GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements

GOST R 52368-2005: Diesel fuel EVRO. Specifications

GOST R 53402-2009: Pipeline valves. Methods of control and testing

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 54808-2011: Pipeline valves. Leakage rates of valves.

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

GOST R ISO 8573-1-2005: Compressed air. Part 1. Contaminants and purity classes

MI 2304-08: GSOEI. Metrological supervision carried out by the metrological services of legal entities. Main provisions

MU 2.1.5.1183-03: Sanitary and Epidemiological Surveillance over the Water Use in Industrial Water Supply Systems

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-584-03: Rules of design, manufacturing and acceptance of welded steel vessels and apparatuses

PB 03-585-03: Process Pipelines Design and Safe Operation Rules

PB 08-624-03: Safety Regulations for oil and gas industry

PB 09-540-03: General codes on explosion protection for explosive and fire hazardous chemical, petrochemical plants and oil refineries

PR 50.2.006-94: Procedure for calibration of measurement equipment

SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste

SP 2.1.7.1386-03: Determining hazard class toxic production consumption waste

SP 2.3.3.2892-11: Sanitary and hygienic requirements for the organization and work with methanol

VSN 011-88: Main pipeline and flowline construction. Bore cleaning and testing

VSN 014-89: Construction of Trunk and Field Pipelines. Environmental Protection

Resolution 390: Fire safety rules in the Russian Federation

The Document is Referenced By:

GOST R 58329-2018: Rules for the operation of main condensate pipelines and product pipelines

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Aviation gas turbine fuels. Method for determining thermal oxidative stability
Language: English
Price: $473.36
Hazard classification of chemical products. General requirements
Language: English
Price: $356.40
Warning labeling of chemical products. General requirements
Language: English
Price: $613.80
Safety data sheet for chemical products. General requirements
Language: English
Price: $121.77
Hoisting cranes. Rules and test methods
Language: English
Price: $393.39
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Aviation fuels. Calculating net calorific value
Language: English
Price: $179.45

YOUR ORDERING MADE EASY!

UzbekistanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!